Makita Dtd171z: Pros And Cons, Common Issues, And Best Places To Purchase

Makita DTD171Z Information

The Makita DTD171Z is a 18V brushless impact driver that is part of the Makita LXT range of tools. It is a powerful and compact tool that is ideal for a variety of applications, including driving screws, drilling holes, and loosening and tightening bolts.

Specifications

• Voltage: 18V
• Motor type: Brushless
• Max. fastening torque: 180 Nm
• Max. impact speed: 3,800 ipm
• Max. rotation speed: 3,600 rpm
• Chuck type: Hex shank
• Chuck capacity: 1/4" (6.35 mm)
• LED light: Yes
• Weight: 1.6 kg (without battery)

Features

• 4-stage impact selection: This allows you to select the right amount of impact power for the job at hand.
• 2 T-modes: These modes are designed for driving screws into thin and thick metal plates.
• A-mode: This mode is for driving screws into wood.
• Bolt mode: This mode is for loosening and tightening bolts.
• Quick mode switching: You can change the impact selection mode with a single hand.
• Memory function: The tool remembers the last impact selection mode used.
• Electric brake: This stops the chuck from spinning when you release the trigger, helping to prevent accidents.
• XPT dust and moisture protection: This helps to protect the tool from dust and water.
• Ultra-compact design: The tool is small and lightweight, making it easy to carry and use.
• Twin dual side LEDs: These lights provide bright illumination of the work area.

What's in the box

• Makita DTD171Z impact driver
• Hex wrench
• Instruction manual

The Makita DTD171Z is a powerful and versatile impact driver that is perfect for a variety of applications. It is compact and lightweight, making it easy to carry and use. The tool features a 4-stage impact selection, 2 T-modes, A-mode, bolt mode, quick mode switching, memory function, electric brake, XPT dust and moisture protection, and twin dual side LEDs. The Makita DTD171Z is a great choice for professionals and DIYers alike.

Makita DTD171Z Compare with Similar Item

a table comparing the Makita DTD171Z with some similar impact drivers:

Feature	Makita DTD171Z	Milwaukee M18 FUEL	DeWalt DCD791D2
Voltage	18V	18V	20V MAX
Max torque	1,770 in-lbs	1,800 in-lbs	1,850 in-lbs
Impacts per minute	0-3,000	0-3,200	0-3,600
Weight	1.5kg	1.6kg	1.7kg
Length	117mm	125mm	130mm
Price	$229	$279	$299

As you can see, the Makita DTD171Z is a very compact and lightweight impact driver. It has a slightly lower max torque than the Milwaukee M18 FUEL and DeWalt DCD791D2, but it is also significantly cheaper. If you are looking for a powerful and compact impact driver that won't break the bank, the Makita DTD171Z is a great option.

Here is a more detailed comparison of the three impact drivers:

• Makita DTD171Z
  • Pros: Compact and lightweight, affordable, powerful
  • Cons: Max torque is slightly lower than some competitors
• Milwaukee M18 FUEL
  • Pros: Powerful, long battery life, durable
  • Cons: Heavier and more expensive than some competitors
• DeWalt DCD791D2
  • Pros: Powerful, long battery life, durable
  • Cons: Heavier and more expensive than some competitors

Ultimately, the best impact driver for you will depend on your individual needs and budget. If you are looking for the most powerful impact driver, the Milwaukee M18 FUEL or DeWalt DCD791D2 are great options. If you are looking for a more affordable option, the Makita DTD171Z is a great choice.

Makita DTD171Z Pros/Cons and My Thought

a comprehensive review of the Makita DTD171Z impact driver, including pros, cons, user reviews, and my thoughts:

Pros:

• Powerful: The Makita DTD171Z has a brushless motor that delivers up to 1,770 in-lbs of torque, making it one of the most powerful impact drivers on the market.
• Compact and lightweight: The DTD171Z is only 5.4 inches long and weighs 2.6 pounds, making it easy to maneuver in tight spaces.
• Ergonomic design: The DTD171Z has a comfortable grip and a lightweight body that reduces fatigue during extended use.
• Long battery life: The DTD171Z comes with a 3.0Ah Li-ion battery that provides up to 220 impacts per charge.
• Durable construction: The DTD171Z is made from high-quality materials that can withstand even the toughest jobs.

Cons:

• Expensive: The Makita DTD171Z is one of the more expensive impact drivers on the market.
• No belt clip: The DTD171Z does not come with a belt clip, which can make it inconvenient to carry around.
• No carrying case: The DTD171Z also does not come with a carrying case, which can make it difficult to store and transport.

User reviews:

Overall, user reviews of the Makita DTD171Z are very positive. Users praise the tool's power, compact size, and ergonomic design. Some users have also noted that the battery life is very good. However, a few users have complained about the price and the lack of a belt clip and carrying case.

My thoughts:

The Makita DTD171Z is an excellent impact driver for professional and DIY users alike. It is powerful, compact, and easy to use. The only downsides are the price and the lack of a belt clip and carrying case. However, if you are looking for a top-of-the-line impact driver, the DTD171Z is a great option.

Here are some additional thoughts on the Makita DTD171Z:

• The brushless motor is a major advantage of the DTD171Z. Brushless motors are more efficient and durable than brushed motors, which means that the DTD171Z will last longer and require less maintenance.
• The compact size of the DTD171Z makes it a great choice for working in tight spaces. The lightweight design also reduces fatigue during extended use.
• The ergonomic grip of the DTD171Z provides a comfortable and secure hold. This is important for preventing hand fatigue and injuries.
• The long battery life of the DTD171Z means that you can work longer without having to worry about running out of power.
• The durable construction of the DTD171Z means that it can withstand even the toughest jobs. This makes it a great choice for professional users.

Overall, the Makita DTD171Z is an excellent impact driver that is perfect for professional and DIY users alike. It is powerful, compact, easy to use, and durable. If you are looking for a top-of-the-line impact driver, the DTD171Z is a great option.

Makita DTD171Z Where To Buy

You can buy the Makita DTD171Z impact driver from the following retailers:

• Makita Direct sells the tool for $199.99 and offers free shipping on orders over $49.
• Walmart sells the tool for $229.99 and offers free shipping on orders over $35.
• Amazon sells the tool for $209.99 and offers free shipping for Prime members.
• Best Buy sells the tool for $229.99 and offers free shipping for orders over $35.
• Lowes sells the tool for $229.99 and offers free shipping for orders over $45.
• eBay sells the tool from a variety of sellers, with prices starting at around $180.

You can also buy spare parts for the Makita DTD171Z from Makita Direct, Amazon, and eBay.

Here are some of the spare parts that are available:

• Anvil assembly
• Power trigger switch assembly
• Spur gear
• Bearing box
• Stator
• Motor armature

The availability of spare parts may vary depending on the retailer.

Makita DTD171Z Problems and Solutions

some common issues and problems with the Makita DTD171Z impact driver, along with expert-recommended solutions:

• The impact driver won't turn on. This is usually caused by a dead battery. Try charging the battery for at least 30 minutes, and then try turning on the impact driver again. If it still doesn't turn on, the battery may be defective and you will need to replace it.
• The impact driver is making a strange noise. This could be a sign of a problem with the impact mechanism. If the noise is loud and grinding, you should stop using the impact driver immediately and take it to a qualified technician for repairs.
• The impact driver is not driving screws in all the way. This could be caused by a dirty or damaged impact bit. Try cleaning or replacing the impact bit, and see if that solves the problem. If it doesn't, the impact driver may need to be serviced.
• The impact driver is stripping screws. This is usually caused by using the wrong size impact bit. Make sure you are using the correct size impact bit for the screw you are driving. If you are still stripping screws, you may need to use a lower torque setting.

Here are some additional tips for troubleshooting and repairing the Makita DTD171Z impact driver:

• Always wear safety glasses when using an impact driver.
• Make sure the impact driver is properly lubricated.
• Inspect the impact driver regularly for signs of wear or damage.
• If you are not sure how to troubleshoot or repair the impact driver, take it to a qualified technician.

I hope this helps!

Makita DTD171Z Manual

Safety Information

• Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
• Save all warnings and instructions for future reference.
• The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

Work Area Safety

• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical Safety

• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce the risk of electric shock.
• Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• Do not use a power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the mains outlet before making any adjustments, changing accessories, or storing power tools. This will prevent accidental starting of the power tool.
• Store power tools out of the reach of children and other untrained persons. Power tools are dangerous in the hands of untrained users.

Maintenance

• Keep power tools clean. A dirty power tool is more likely to malfunction.
• Inspect power tools periodically for damaged or worn parts. If any part is damaged, have the part repaired or replaced by a qualified service technician.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
• Use the power tool only for its intended purpose. Do not use the power tool for any other purpose than described in this instruction manual.

Troubleshooting

• If the power tool fails to operate, check the following:
  • Is the battery properly inserted?
  • Is the battery charged?
  • Is the trigger switch locked?
  • Is the workpiece properly clamped?
• If the power tool still fails to operate, contact a qualified service technician.

Maintenance

• To maintain the performance of your power tool, it is important to clean and lubricate it regularly.
• To clean the power tool, use a soft brush or cloth and mild soap and water. Do not use harsh chemicals or solvents.
• To lubricate the power tool, apply a light coat of oil to the moving parts.
• Store the power tool in a dry, cool place.

Warranty

This Makita power tool is warranted to the original purchaser to be free from defects in material and workmanship for a period of one (1) year from the date of purchase. If this power tool becomes defective within the warranty period, it will be repaired or replaced free of charge.

Contact Information

For more information about this product or to contact Makita for warranty service, please visit our website at www.makitatools.com or call us at 1-800-462-5482.

Additional Information

• This power tool is not intended for use in commercial or industrial applications.
• This power tool is not intended for use by children.
• This power tool should only be used by persons who have read and understood the instructions in this manual.
• Always wear safety glasses when using this power tool.
• Use only genuine Makita batteries and chargers.
• Do not modify this power tool in any way.
• Dispose of this power tool properly in accordance with local regulations.